Hot Dip Galvanized Turnbuckle Body. ASTM F1145, Type 1, Grade 1, Class B. Actual measurements may very slightly +/- depending on production run within IFI Tolerances. Consist only of the open frame or body of the turnbuckle; no end fittings included. Applied in a straight, in-line manner only.The larger the thread diameter of the end fitting, the more load capacity the turnbuckle will have. The longer the length of the turnbuckle body, the more slack it can take when tightening or loosening the turnbuckle.
HDG is corrosion and rust resistant. Suitable for long lasting and exterior environments. Due to the finishing process for Hot Dip Galvanized fasteners, it is recommended to only use Hot Dip Galvanized fasteners with Hot Dip Galvanized fasteners and not mix metals. This can create threading and durability issues.Hot Dip Galvanized Turnbuckle Bodies are devices used to adjust the tension or length of ropes, cables, tie rods, and other tension systems. Sizes listed as: Diameter - Thread Pitch x Take-Up Length. Please follow Ken Forging recommendations for load capacities of Turnbuckles and safety information on their website. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. All items are combined into one box not to exceed 12 items and 66 lbs. Listing photo is generic for the fastener type listed in this listing and is not to scale. Please refer to the description for fastener details. We will respond with the requested information quickly.